Crane Winch Jib Lifting Winch Electric Hoist winch C1000

Superwinch		*CRANE WINCH*
		C1000
	CRANE WINCH / LIFTING WINCH.


Applications
	Vehicle Jib mounted Cranes
	General light duty lifting

Standard Features
	5:1 Safety Factor
	Full Load Mechanical Brake
	Power In and Power Out
	Hand Held Remote Control
	Roller Fairlead
	Twin Wire Rope Set Screws
	Wire Rope Tensioning Plate
	Hand Saver Bar

Specifications
Rated line Pull ( 1st layer )	1,000 lb. (454 kg)
Motor	1.3 hp 12v or 24v
Gearing	Differential Planetary
Gear Ratio	159:1
Brake	Mechanical and Dynamic
Braking Action	Dynamic
Dimensions (03002, 0310)	15.1" L. x 8.7" D. x 6.0" H. (383mm L. x 221mm D. x 152mm H.
Drum Diameter	1..625" (41.3mm)
Drum Length	3" (76.2mm)
Weight	33 lb. (15 kg)

Performance with 1st Layer of cable on drum
Line Pull		Line Speed		12v Motor	24v Motor
lbs.	Kg.	FPM	M/M	Amps	Amps
0	0	16.5	5	20	10
500	227	14.0	4.2	50	25
1,000	454	12.3	3.7	80	40

Accessories
Pulley / Snatch Block	2227A
Wire Rope 1/4" x 50' (6.4mm x 15.2m)	1577A (See NOTES below)

C1000:- C03002 - 12v. / C03010 - 24v. Dimension Diagram

Crane winch Material handling lifting winch and crane winch electric hoist winch by Superwinch Innovation Engineering UK.

15.1"L. x 8.7"D. x 6.0" H. (383mm L. x 221mm D. x 152mm H.)

PLEASE NOTE: IMPORTANT

Always read the handbook and ensure that you fully understand it prior to use.

Proper training should be obtained prior to using a Crane or Winch.

Winches are NOT intended for, and must NOT be used for the transportation of people.

Always use an Isolator switch.

NOTE:

It is your responsibility to ensure that you comply with all Health and Safety Regulations and The Lifting Operations and Lifting Equipment Regulations 1998 (LOLER). Your attention is drawn to Statutory Instrument 1998 No. 2307.

It is your responsibility to ensure that the wire rope is to the required specification for purpose.

We reserve the right to alter specifications and prices without notice.