Superwinch EP12.5 & EP16.5 Electric Winches. BS EN 14492-1 Pro Range


SUPERWINCH		EP12.5
		EU Spec Pull: 3,560Kg.
		Design Pull: 5,670Kg.

		EP16.5
		EU Spec Pull: 4,305Kg.
		Design Pull: 7,484Kg.
(Winch shown with optional mounting plate and optional Drum Guard)
Roller Fairlead only fits to the Mount Plate and not the winch
We recommend you use the official mounting plate which also provides structural support

High Performance General Purpose Electric Winches

PRO Range Conforms to EU Specification: BS EN 14492-1

click here For more information on BS EN14492-1 Regulations & Specifications

Standard Features
	Winch	Manufactured to meet BS EN 14492-1
	Winch Drum	Steel construction 10:1 D:d ratio
	Wire Rope	EP12.5: 10mm x 30mtr / EP16.5: 11mm x 23mtr
	Rope Safety	2:1 safety factor. Tensile grade 1960 N/mm2. Hook & catch. Hand saver strap
	Wire Rope Fixing	Twin hole safety feature
	Gearbox	3 stage planetary
	Freespool	Freewheel mechanism lift & turn
Roller Fairlead only fits to the Mount Plate & not the winch. Mount plate & Drum Guard optional.	Power	In & out. 12 volt or 24 volt models
	Control	Wired hand held pendant control
	Load Limiter	Thermal overload cut out
	Brake	Automatic full load holding
	Roller Fairlead	Standard (Does not fit to winch)
	Labelling	Rating plate showing 1st & top layer figures. Fairlead warning label

Specifications
	EP12.5	EP16.5
Original Design Line Pull	5,670 kg (12,500lbs)	7,484 kg (16,500lbs)
PRO Range: BS EN 14492-1 EU Rated Line Pull	3,560 kg	4,305 kg
Motor, 12 volt	4.2 kW (5.6hp) Series wound	4.2 kW (5.6hp) Series wound
Motor, 24 volt	2.7 kW (3.6hp) Series wound	2.7 kW (3.6hp) Series wound
Gearing	3-Stage planetary	3-Stage planetary
Gear ratio	261:1	315:1
Free spooling clutch	Lift & Turn	Lift & Turn
Braking	Automatic, 100% load holding	Automatic, 100% load holding
Dimensions	673mm L x 216mm D x 285mm H	673mm L x 216mm D x 285mm H
Drum diameter	90mm	90mm
Drum length	205mm	205mm
Weight, winch only	66.2kg	68.5kg
Switching method	H-D Rubber handheld remote	H-D Rubber handheld remote
Switching mechanism	H-D solenoid operated contactors	H-D solenoid operated contactors
Colour coded wiring	Standard	Standard

Optional Accessories
Flatbed mount plate	Necessary to fit roller fairlead
Rope Drum Cover	Drum safety guard
Emergency Stop Kit	12v or 24v Emergency stop switch, solenoid & warning light


NOTE: To comply with BS EN 14492-1 A Wire rope / Drum Cover and an Emergency Stop / Isolator switch must be fitted.

Performance
Line pull	EP12.5			EP16.5
1^st layer on drum	Line speed	Motor Amps		Line speed	Motor Amps
Kg	M/min	12 volt	24 volt	M/min	12 volt	volt
0	7.3	55	49	8.7	63	49
910	4.6	110	115	4.7	105	115
1820	2.4	160	165	2.4	165	150
3560	1.6	240	190	1.6	215	190
4305	N/A	N/A	N/A	1.3	245	250

The Following relates to the Original Design Specification
5440	0.8	355	310	N/A	N/A	N/A
6800	N/A	N/A	N/A	0.6	370	425
NOTE: All the above figures are intended as a guide only as speed and current draw will vary depending various practical factors.

These winches are mounted feet forward towards the load.

We strongly recommend that you use the official mounting plate which is load bearing.

If making up your own mounting then it is imperative that you refer to and fit the winch in accordance with the installation instructions provide.

Foot Forward

Facing Load