|
|
 |
|
High Performance General Purpose Electric Winches |
|
|
|
|
|
High Performance General Purpose Electric Winches |
|
| Standard Features | |
 |
Powers load In and Out. |
| Automatic load holding brake. | |
| Durable handheld remote switch. | |
| Heavy duty roller fairlead. | |
| Free spooling clutch for fast wire rope payout. | |
| Standard Wire Rope. | |
| High tensile wire rope can be supplied as Option. | |
| Quiet, efficient, 3-Stage planetary gear box. | |
| Efficient 4.2kW, (2.7kW-24v) series wound motor. | |
| Hook handling strap. | |
| Pre-wired Heavy duty sealed contactors. | |
| Roller Fairlead only fits to the Mount Plate and not the winch, | |
| (Winch shown without mounting plate) | |
|
We recommend you use the official mounting plate. |
|
|
Specifications |
||
|
EP12.5 |
EP16.5 |
|
| Rated line pull, (single line) | 5,670 kg (55.6 kN) (12,500lbs) | 7,484 kg (73.4 kN) (16,500lbs) |
| Motor, 12 volt | 4.2 kW (5.6hp) Series wound | 4.2 kW (5.6hp) Series wound |
| Motor, 24 volt | 2.7 kW (3.6hp) Series wound | 2.7 kW (3.6hp) Series wound |
| Gearing | 3-Stage planetary | 3-Stage planetary |
| Gear ratio | 261:1 | 315:1 |
| Free spooling clutch | Lift & Turn | Lift & Turn |
| Braking | Automatic, 100% load holding | Automatic, 100% load holding |
| Wire Rope Supplied with winch from new: | 9.5mm x 38mtr | 11mm x 27mtr |
| Wire Rope Replacement: | 11mm x 26mtr, P/N 200009 | 12mm x 25mtr, P/N 200008 |
| Dimensions | 673mm L x 216mm D x 285mm H | 673mm L x 216mm D x 285mm H |
| Drum diameter | 90mm | 90mm |
| Drum length | 205mm | 205mm |
| Weight, winch only | 66.2kg | 68.5kg |
| Switching method | H-D Rubber handheld remote | H-D Rubber handheld remote> |
| Switching mechanism | H-D solenoid operated contactors | H-D solenoid operated contactors |
| Roller fairlead | Standard | Standard |
| Colour coded wiring | Standard | Standard |
| Flatbed mount plate | Option: 258006 | Option: 258006 |
|
Performance |
||||||
|
Line
pull |
EP12.5 |
EP16.5 |
||||
|
1st layer on drum |
Line speed |
Motor Amps |
Line speed |
Motor Amps |
||
|
Kg |
M/min |
12 volt |
24 volt |
M/min |
12 volt |
24 volt |
| 0 | 7.3 | 55 | 49 | 8.7 | 63 | 49 |
| 1814 | 2.4 | 160 | 165 | 2.4 | 150 | 165 |
| 3630 | 1.5 | 245 | 195 | 1.5 | 220 | 195 |
| 4536 | 1.2 | 290 | 260 | 1.2 | 255 | 260 |
| 5670 | 0.8 | 350 | 310 | N/A | N/A | N/A |
| 7484 | N/A | N/A | N/A | 0.6 | 385 | 260 |
| NOTE: All the above figures are intended as a guide only as speed and current draw will vary depending various practical factors. | ||||||
|
Dimensions |
|
|
|
These winches are mounted feet forward towards the load. We strongly recommend that you use the official mounting plate which is load bearing. If making up your own mounting then it is imperative that you refer to and fit the winch in accordance with the installation instructions provide. |
|
|
Foot Forward Facing Load |
 |
|
Optional Mounting Plate |
|
|
|
IMPORTANT. The information provided on this web site is intended as a guide only. The owners and authors of this web site take no responsibility for the accuracy of the information provided. It is the responsibility of the user and / or the owner to ensure they comply with all regulations when installing and using a winch. To comply with EC Directive, an Isolator Switch MUST be fitted to all winches. Winches are not sold or are intended for the lifting or transportation of people. Winches are pulling devices. We reserve the right to alter specification and prices without prior notice. INNOVATION
ENGINEERING
|
